-
10" x .250 Segmented diamond jade grinding wheel with 1" Bore -
- All Natural Stone, Engineered Stone, Glass, Porcelain
- Special hybrid soft bond designed for high resin content engineered stone
- 2.4mm Pad Thickness
- Velcro Backed
-
- All Natural Stone, Engineered Stone, Glass, Porcelain
- Special hybrid soft bond designed for high resin content engineered stone
- 2.4mm Pad Thickness
- Velcro Backed
-
Diamond File, Flat 7" Total length with handle, 3 1/4 File length -
Diamond File, Round 7" Total length with handle, 3 1/4 File length
-
Diamond File, Triangle 7" Total length with handle, 3 1/4 File length
-
8" x .250 Segmented diamond jade grinding wheel with 3/4" bushing
-
A1 Diamond Mounted Point Metal Bonded, 1” height, 1/4” shank For wet use only -
- Resistant to a wide range of chemicals
- Sewn edge style
- 45" L x 35" W, Yellow
-
This 6-piece carving set includes hand-forged tools made of the finest quality steel tempered for soft marble and alabaster. Each tool has long-lasting cutting edges. The set includes: five (5) chisels and one (1) carving hammer of soft iron. Comes in a canvas roll. -
Durable canvas roll ideal for storing wood and stone carving tools. Has 6 pockets; suitable for 9" tools. -
Carbide Chisel, 1/4 flat with a 9/16 shank -
Carbide Chisel, 15/32 flat with a 9/32 shank
-
Carbide Chisel, 2 Tooth with a 9/32" shank
-
Carbide Chisel, 3 Tooth with a 9/32" shank
-
Carbide Chisel, 3 Tooth with a 1/2" shank
-
Carbide Chisel, 3 Tooth with a 1/2" shank
-
Carbide Chisel, 3/16 Flat with a 9/32 shank
-
Carbide Chisel, 3/8" Flat with a 9/32" shank
-
Carbide Chisel, 3/8" Flat with a 1/2" shank
-
Carbide Chisel, 4 Tooth with a 9/32" Shank
-
Carbide Chisel, 5 Tooth with a 9/32" Shank
-
Carbide Chisel, 5/16" Flat with a 9/32" shank
-
Carbide Chisel, 5/32" Flat with a 9/32" shank
-
Carbide Chisel, 9/16"" Flat with a 1/2" shank
-
Carbide Chisel, 9/32" Flat with a 9/32" shank
-
Out of stock / please inquire
Makita Bull point chisel 250mm SDS-Plus Shank- Makita SDS Steels have been through a performance enhacning change.
- Extra high resistance to wear and deformation has been achieved with induction hardening extending efficient life time by 30%.
- Testing has shown materila removal rates have also been increased by over 15%.
-
Diamond Hand Polishing Pads 4" x 2-1/4" Rectangular pad -
Out of stock / please inquire
Diamond Hand Polishing Pads 4" x 2-1/4" Rectangular pad Grits Included - 70, 120, 220, 400, 600, 800, 1800, 3500
-
Diamond Mounted Point, Electroplated, Ball 1/4 W x 1/8"L with 1/8" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Ball 5/16" with 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Ball 1/8" with 1/8" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Ball 5/8" with a 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Cone 3/8" W x 1/2" L with 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Cone, Coarse 3/8" W x 1/2" L with 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Inverted Cone 7/16” L x 5/16” W, L with 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Inverted Cone 3/8” L x 1/8” W, L with 1/8" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Cylinder, Fine 7/16" W x 13/16" L with 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Cylinder, Fine 1/2" W x 13/16" L with 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Cylinder 13/32" W x 1 5/8" L with 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Inverted Cone 9/32” W x 1” L with 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Oval 1/8" Thick x 5/8" W with 1/4" Shaft For wet use only -
Diamond Mounted Point, Electroplated, Wheel, Fine 1" W x 32/37" L with 1/4" Shaft For wet use only -
Die Grinder, 1/4" Angled 90 Degree -
Double Ended Scutch/Hammer Comes with 2 x 1/2” combs and 4 x 1” combs -
Choice of of 7 collets or Set of 7 collets that fit H.43T, H.44, H.44T, H.44TSJ, H.43HT and H.44HT Handpieces and also for use with BL Bench Lathe Adapters A-CHA-4 and A-CHA-5. -
Heavy duty collet-style handpiece for use with Series SRH, TXH and LXH square drive flex shafts ONLY. Comes with 1/8″ and 1/4″ collets. -
Collets for H.25, H.25H, H.35 and H.35SJ Handpieces. Choose either a set of 5 in US customary units (fractions of an inch) or individual collets -
Out of stock / please inquire
Popular among woodcarvers and other who use burs with 1/4″ (6.14 mm) shanks. H.44T comes with 3/32″ (2.35 mm), 1/8″ (3.18 mm) and 1/4″(6.14 mm) collets. Use with a key tip shaft ONLY -
63-3/4″ long Square Drive inner shaft comes on Series SRH, TXH, and LXH motors. -
The carbide Frosting Chisel is used on soft stone to create a soft, matte finish. For best results, the fine teeth the Frosting Chisel's solid carbide tip should be kept clean and never used on hard stone or abrasive stone. -
This imported steel rasp is made for work on wood, stone, metal and plaster. Approximate length - 10". -
Out of stock / please inquire
Features:- Variable speed
- Used to remove tile and linoleum, for cleaning out mortar and for detailed chiseling
- Factory-packed grease for maintenance-free operation
- Operator-controlled variable speed dial
- One-touch sliding chuck makes bit changes quick and easy
- Chisel can be positioned at 12 different angles
- Blows per minute: 2,000 to 3,500 BPM
- Impact energy: 2.1 ft. lbs
- Amps: 5.0A (120V)
- Noise level: 83 dB
- Overall length: 18-13/32″
- Net weight: 7.1 lbs
-
Used for most types of stone carving, this 1 1/2-lb. hammer allows the sculptor to carve with exceptional precision and ease. -
Used for most types of stone carving, this 1 1/2-lb. hammer allows the sculptor to carve with exceptional precision and ease.
-
Scutch Combs for part #HSDE -
Silicon Carbide Mounted Point, Ball 120 Grit Ball - 1 - 1/16 " Shaft - 1/4" x 1 1/2"L -
Silicon Carbide Mounted Point, Cylinder 120 Grit Point - 3/4" x 1" L Shaft - 1/4" x 1 1/2"L -
Silicon Carbide Mounted Point, Cylinder 120 Grit Point - 1" x 1- 1/2" L Shaft - 1/4" -
Silicon Carbide Mounted Point, Cone 120 Grit Point - 1 3/16" L Shaft - 1/4" x 1 1/2"L -
Silicon Carbide Mounted Point, Cone 120 Grit Point - 1 1/16" L Shaft - 1/4" x 1 1/2"L -
Silicon Carbide Mounted Point, Cone 120 Grit Taper - 1 3/8" L Shaft - 1/4" x 1 1/2"L -
Silicon Carbide Sanding Sponge 3 7/8" x 3 3/4" x 12" Thick -
Silicone Carbide 9" X 11" Wet/Dry Sandpaper -
Solid Carbide Bur, Double Cut, Ball 1/4" Diameter x 7/32" Lg x 1/4" Shank -
Solid Carbide Bur, Double Cut, Ball 3/8" Diameter x 5/16" Lg x 1/4" Shank
-
Solid Carbide Bur, Double Cut, Cylinder 1/2" Diameter x 7/16" Lg x 1/4" Shank
-
Solid Carbide Bur, Double Cut, Cone 1/4" Diameter x 1" Lg x 1/4" Shank -
Out of stock / please inquire
Solid Carbide Bur, Double Cut, Cone 3/8" Diameter x 5/8" Lg x 1/4" Shank
-
Solid Carbide Bur, Double Cut, Cone 1/2" Diameter x 7/8" Lg x 1/4" Shank
-
Solid Carbide Bur, Double Cut, Cylinder 1/4" Diameter x 5/8" Lg x 1/4" Shank -
Solid Carbide Bur, Double Cut, Cylinder 3/8" Diameter x 3/4" Lg x 1/4" Shank
-
Solid Carbide Bur, Double Cut, Cylinder 1/2" Diameter x 1" Lg x 1/4" Shank
-
Solid Carbide Bur, Double Cut, Cylinder - Radius End 1/4" Diameter x 5/8" Lg x 1/4" Shank -
Solid Carbide Bur, Double Cut, Cylinder - Radius End 3/8" Diameter x 3/4" Lg x 1/4" Shank
-
Solid Carbide Bur, Double Cut, Cylinder - Radius End 1/2" Diameter x 1" Lg x 1/4" Shank
-
Solid Carbide Bur, Double Cut, Oval 1/4" Diameter x 3/8" Lg x 1/4" Shank -
Solid Carbide Bur, Double Cut, Oval 3/8" Diameter x 5/8" Lg x 1/4" Shank
-
Solid Carbide Bur, Double Cut, Oval 1/2" Diameter x 7/8" Lg x 1/4" Shank
